How to use
Processing temperature: 70°C – 420°C
When cleaning keep the same parameters ( such as temperature, screw speed etc.) as the last material to be processed and emptying and clean from old material.
BARREL , SCREW, NOZZLE and HOT RUNNERS
1. Upload and purge material (Virgin or next production) an amount to eliminate the big of dirty.
2. Empty the plasticizing group (HOPPER AND BARREL EMPTINESS )
3. Spread on the Strip P&P CREAMTM TABS (see table above) load and purge the strip until come out from the nozzle
4. Stop the machine and leave it to react for few minute
5. Load and Purge with Strip (Virgin or next production) it to eliminate all residuals removed by the P&PCream™ Tabs
6. If the system needs repeat Phase 2 to phase 5
7. Then start the new production.
|Injection moulding machine||Barrel capacity||Nr. Tabs|
|50 Tonn||0.2 Kg||1|
|100 Tonn||0.5 Kg||1|
|200 Tonn||1.0 Kg||1|
|400 Tonn||2.0 Kg||2|
|600 Tonn||3.0 Kg||3|
|800 Tonn||4.0 Kg||4|
|1000 Tonn||5.0 Kg||5|
|1500 Tonn||7.5 Kg||7|
|2000 Tonn||10.0 Kg||10|